Topband: Adding chicken wire or mesh on top of radial field

[Craig Clark]

Today's Topics:

   1. Re: Adding chicken wire or mesh on top of radial field
      (Peter Bertini)
   2. Re: Adding chicken wire or mesh on top of radial field
      (Raymond Benny)
   3. Re: Adding chicken wire or mesh on top of radial field
      (n4is at n4is.com)


----------------------------------------------------------------------

Message: 1
Date: Sun, 3 Jun 2018 16:14:45 -0400
From: Peter Bertini <radioconnection at gmail.com>
To: topband at contesting.com
Subject: Re: Topband: Adding chicken wire or mesh on top of radial
	field
Message-ID:
	<CA+uDY2QO-x2Dac+bP7DYLnhHkKnEgkQh5kaPN8C4WgGLO_9ndA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Why would bonding the added matting be required if it is laid over or
beneath an existing radial field?  It reduces ground losses regardless.

Peter


All,

Forgive me if this has already been posted. I have not been following TB as
well as I normally do.

http://www.sherweng.com/documents/GroundScreen-sm.pdf

Sherwood's article from HR Magazine.


Craig Clark K1QX