Topband: BOG height

[John Harden, D.M.D.]

It's hard to beat the Hi-Z arrays when you have limited space..

73,

John, W4NU

On 8/1/2019 1:23 PM, Chuck Dietz wrote:
> When I tried a BOG compared to a Beverage, I found the BOG to be almost
> useless compared to the Beverage. I would put up one of the arrays K9AY,
> SAL-30, 4sq rec, etc.
> I don't think you will be happy with a BOG after using a Beverage.
>
> Chuck W5PR
>
> On Thu, Aug 1, 2019 at 12:08 PM Paul Mclaren <paul.mcl at gmail.com> wrote:
>
>> Just a ???simple??? question hopefully - How close to the ground should a BOG
>> be for best/good performance?
>>
>> I am looking for any additional info that I can get to supplement what I
>> have found online already so good on the balun, wire type and termination
>> resistor.
>>
>> My single unterminated beverage I have at the moment was transformational
>> compared to a Wellbrooke loop but the location it is in will soon be 80 new
>> homes so time to look elsewhere.  Current plan is a small number (maybe
>> three) BOG antennas switched by a remote relay but distance is limited to
>> 200ft maximum in any direction.
>>
>> Plan is to use the BOGs for 160 but also 80,40 and maybe 30m.
>>
>> Regards
>>
>> Paul MM0ZBH
>> _________________
>> Searchable Archives: http://www.contesting.com/_topband - Topband
>> Reflector
>>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector