Topband: BOG

[FZ Bruce]

This happens due new low band DXers trying to apply Beverage antenna
info. Then asking for assistance.

	Harold Beverage first had a low wire over by Otter Creek Maine, but
it was high up on the rocks well above the Beach/salt water..(minimum
earth to wire capacitance for the frequency) 

	New DXers need to have a name to point them toward useful
information.

	73

	Bruce-K1FZ

	 "Artek Manuals" 
To: topband at contesting.com
Cc: 
Sent: Tuesday December 3 2019 6:21:20PM
Subject: Re: Topband: BOG

You sit around in the pub for long thinking these UP?
 I just built a LOG myself ( Loop on Ground) ... I also modeled a SLOG
( 
 square loop on ground) but decided that it wasn't very good

 Dave
 NR1DX

 On 12/3/2019 5:56 PM, Mike Smith VE9AA wrote:
 > polliwog
 >
 > piece of long limp inductive wire on ground
 >
 > 
 >
 > Mike, Coreen & Corey
 >
 > Keswick Ridge, NB
 >
 > 
 >
 > _________________
 > Searchable Archives: http://www.contesting.com/_topband [1] -
Topband Reflector

 -- 
 Dave
 Manuals at ArtekManuals.com
 www.ArtekManuals.com

 _________________
 Searchable Archives: http://www.contesting.com/_topband [2] - Topband
Reflector

	

Links:
------
[1] http://www.contesting.com/_topband
[2] http://www.contesting.com/_topband