Topband: Satisfactory fiberglass pole for K9AY loop

[Russ Tobolic]

 I use 3 pcs of DXE-FT1250-8 (8',  1.25" OD) and 1 pc DXE-FT1000-8 (8',  1" OD).  I cut the 1" OD into 2 pcs 2' long which nested inside the larger tubing and used the rest to stick out the top.  The total height is 25' for my K9AY loops.  I did try the cheaper route with similar dia PVC but it flopped around too much and was not easy to handle.  The fiberglass is stiffer.  With a set of dacron rope guys in the middle and the loop for top guys it has been very stable up against snow, wind and ice storms here in Michigan.
Russ, N3CO
    On Wednesday, February 20, 2019, 9:27:38 AM EST, N4ZR <n4zr at comcast.net> wrote:  
 
 Maybe 15-20 years ago, I used a very inexpensive push-up  fiberglass 
pole to support the loops of a K9AY loop system.  Alas. details and 
source have fled my brain, and much of what I've studied on line is much 
more expensive (and probably much sturdier) that what I had then. I'd 
appreciate any current suggestions.

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector