Topband: Why aren't these universal angle iron brackets designed right?

[terry burge]

Thanks for the help guys. Got reminding about the difference between pipe and tubing sizes concerning the U-bolts. And some other things like overbuilding my detune setup. 


Terry

KI7M


> On January 2, 2019 at 11:49 PM terry burge <ki7m at comcast.net> wrote:
> 
> 
>     Hi folks,
> 
> 
>     I've ran into this problem multiple times and thought I'd ask to see if there is a simple explanation or if perhaps manufacturers of universal angle iron brackets as sold in Lowes, Home Depot, etc.  just don't care. I can never find these 'plumbers tape' type of angle irons that have holes that will match up to the U-bolts they sell. And it seems the U-bolts are too large half the time for the holes.  Seems to me that by now it would occur to manufacturers that U-bolts get used on these angle irons with all the holes so conveniently places that they would make sure the U-bolts would go through them? 
> 
> 
>     I once had a professor who would say 'if you have a question don't hesitate to ask it because chances are other people are also wondering that same thing but were afraid to ask'. So I ask, WHY? Just seems like the hardest thing I keep running into is to 'somehow' expand a bolt hole to match a bolt or U-bolt. That just isn't easy.  Maybe clamp down my drill horizontal with an auger style bit and start drilling?
> 
> 
>     Somehow I know I'll be able to detune my tower but as usual this problem reared it's ugly head.
> 
> 
>     Terry
> 
>     KI7M
> 
>