Topband: Ground return wire under a Beverage

[Artek Manuals]

I have been experimenting a lot with BOGs in the last couple of months. 
And now thanks to a very amiable neighbor will be moving into building 
some more traditional elevated Beverages in the 450 to 500 foot range

My bogs and the beverages are /will be constructed using RG6 as the 
antenna itself and will be reversible. In reading Misek/ W1WCR Beverage 
Antenna Handbook. He often uses a ground return wire tying the ground 
rods together at each end ( except for  BOGs) with an insulated wire on 
top of the ground. Reading ON4UN Low Band DX ing I did not see any 
Beverages with the ground return wire ! ?!

So here is the question has any one done it both ways and what is the 
net affect (if any) with and without the ground return wire under the 
same Beverage.

Dave
NR1DX
manuals at artekmanuals.com

-- 
Dave
Manuals at ArtekManuals.com
www.ArtekManuals.com


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus