Topband: FW: RE: Ground for K9AY Loop
FZ Bruce
k1fz at twc.com
Tue Oct 15 15:21:55 EDT 2019
----------------------------------
Hi Pete,
I think a ground rod is better, not all will agree. With a rod you do
not have to worry so much about the wires. ( animals chewing, etc)
Tripping anyone, going out of balance and picking up signals. A rod
can be assisted by water pressure to go in. (A copper pipe with a
garden hose attached). Also hardware stores have long drills, drill
extensions, impact devices (similar to a jack hammer, to penetrate the
tough stuff). Whatever it takes to get down into good moisture.
73
Bruce-K1FZ
-----------------------------------------From: "N4ZR"
To: "topband reflector"
Cc:
Sent: Monday October 14 2019 3:29:54PM
Subject: Topband: Ground for K9AY Loop
The loop is finished, but I'm having a devil of a time getting a
ground
rod in at the base. It's been over a month since the last rain here,
and the soil is really hard. Seems like I read someplace that you
could
substitute a couple of 50-foot on the ground radials for a ground rod
if
necessary. True?
PS even without the ground, or the feedline chokes, directivity seems
pretty good on high AM BC stations.
Any advice much appreciated.
--
73, Pete N4ZR
Check out the Reverse Beacon Network
at < [1]http://reversebeacon.net [2]>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
_________________
Searchable Archives: [3]http://www.contesting.com/_topband [4] -
Topband Reflector
Links:
------
[1] http://reversebeacon.net
[2] http://reversebeacon.net
[3] http://www.contesting.com/_topband
[4] http://www.contesting.com/_topband
More information about the Topband
mailing list