Topband: Suggested Frequency

K9FD merv.k9fd at gmail.com
Wed Dec 2 19:37:32 EST 2020


When I purchased this property in Hawaii,  there were two 830kc towers 
left from the
KAIM 50KW station.   I made a matching network and loaded up for the 
Stew perry,
only had my exciter so ran low power,  if I remember correct I was 
number 1 low
power world wide..  but my memory is corrupted so would have to look it up.
Tower radiated very well and I only had it to receive on as well.
Location Im sure is part of it,  but I remember at the time all advice 
was against even
trying.
Worked for me.
I gave the feed point info for 830KC to a top band guru and he gave me 
the L and C
needed for 160,  his figures were dead on the money.  Did not even need 
to tune it.
73 Merv K9FD
>> Our club is working on a project where we will be able to use a AM 
>> Broadcast antenna on 160 meters.
>
> Don't get your hope up. Roughly 40 years ago, I did that, along with 
> another ham, at a daytimer for which another ham friend was the chief 
> engineer. As I recall, the station was around 830 kHz, and was in a 
> northwestern Chicago suburb. We had no problem loading the tower, but 
> couldn't hear a bloody thing, even after trying to rig a Beverage the 
> second night. Zero QSOs.
>
> 73, Jim K9YC
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband 
> Reflector



More information about the Topband mailing list