Topband: EZNEC

[Chortek, Robert L.]

Thanks for the reply.

I actually, finally, found what I was looking for in the manual.

The answer is you click on any open cell under End 1 in the wires box and then right click. That brings up a dialog box which allows you to edit the connections.

It’s easy once you know where to look!

Bob
Robert L. Chortek

On Mar 9, 2020, at 8:07 PM, Mike Waters <mikewate at gmail.com> wrote:



[External Email]

There are some .ez antenna files included. One of them is a vertical with a ground plane, which you can customize.

73, Mike
W0BTU


On Mon, Mar 9, 2020, 10:03 PM Chortek, Robert L. <Robert.Chortek at berliner.com<mailto:Robert.Chortek at berliner.com>> wrote:

I’ve just downloaded the demo version of EZNEC and I am working through the tutorials.   I’m trying to model a vertical with four elevated radials on 160 m. The problem I’m having is I can’t figure out how to separate the radials from the vertical and put the source at the base of the vertical and the radials. All five wires are connected and I can’t separate them.

 I spent a great deal of time reading through the manual and using the help function but for the life of me I simply cannot find where the manual discusses how to modify (edit) the “connections”.  Can somebody point me to the right place?  I certainly can’t find it.


Bob AA6VB