Topband: K9AY Loop Questions

[Pete Smith N4ZR]

I recently installed a K9AY loop (with the Array Solutions controller), 
and have a couple of questions.  Installation is pretty standard, with a 
fiberglass pole at the center, ground rod at its base, and on the ground 
radials under each direction of the loop.

The antenna is directional, as demonstrated by tuning in broadcast 
stations at the high end of the AM band and separating stations on the 
same frequency so that I can hear one or the other.  Atmospheric noise 
is 1-2 S units more on my inverted L than on the K9AY antenna, but 
signal strengths of stations in the favored direction of the loop seem 
about the same or a bit lower than the inverted L.  The Termination 
adjustment is working, to judge by the switching transients, but seems 
to make little or no difference.

How do these results compare with others' experience?  I didn't expect a 
"magic bullet", but the K9AY loop seems a little bit underwhelming.

-- 
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<http://beta.reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.