Topband: NCC-2 NCC-1

[Steve Muenich]

Andy,
I just got a NCC-2 from a QRZ seller.  
It has several optional modules. 

My noise is mostly on the higher HF bands.  I know the approximate location of the source of the noise. 
I installed a hi-impedance vertical element about 150ft away from the noise source and it’s connected to my B input on NCC-2.  
Input A in my main TX antenna which is a yagi at 120ft. 
The NCC-2 works good at removing most of the noise.   It does take some time to get used to adjusting it.  
I’ve only had it hooked up a couple weeks so still learning how to use.  Feel free to contact me privately if you would like. 

73,
Steve NA5C


Sent from my mobile device

> On Dec 23, 2024, at 8:12 AM, Andree DL8LAS via Topband <topband at contesting.com> wrote:
> 
> Hey,do any of you use an NCC-2 or NCC-1 for antenna phasing or noise reduction? Do you have any experiences and can give  me information?
> 73 Andy DL8LAS
> 
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector