guy wire grounding

[Steve Sawyers n0yvy]

> From:          randy@mail.ameritel.net
> Date:          Wed, 21 Aug 1996 16:57:26 -0400
> To:            towertalk@contesting.com
> Subject:       guy wire grounding

> What's the easiest (cheapest, most effective) means of connecting
> copper grounding wire to multiple guy wires at or near the equalizer
> plate?  
> 

Just use standard cable clamps and left over guy cable to run down to 
within 1 foot of the ground and then use a copper cable clamp to 
clamp the galvanized guy wire to the copper ground line using an 
anti- oxidizing compound like No-Ox or Pent-ox from an electrical 
supply house.

de n0yvy steve