TH6 and 402CD

[Cathy Elizabeth D'Entremont]

Hi Ya'll:
	Assuming I will overcome my ACC obstacles, this comes close to
duplicating my proposed install (Telrex TB-6EM and Hy-Gain 402BA, w/
15' of 2" mast above a heavy-duty pillow-block bearing and 5' below to
a T2X on Tristao HDX-600). I'm intrigued by your concept of putting the
40M at the bottom, my thinking was the Telrex weighs so much more and
has a larger wind load area that putting it just above the bearing and
the lighter/smaller (total s.f.) Hy-Gain up 7' or so would be the way
to go.  Lower c.g., stresses on rotor, etc.  Hadn't considered the
maintainence aspect.  Am I missing out in my thinking here?

73, Gerald D'Entremont W5BA
cdent@tenet.edu

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P