corrosion inhibitor n

[bill.lumnitzer@paonline.com]

 Ac> The only problem I did have was that on split
 Ac> tubing/hose clamp joints it reduces friction enough to make a tight
 Ac> connection more difficult. 
 Ac> 73 de Terry KK6T ex AC6EF

Take a hint from ON4UN and shoot a pop rivet into each joint after you
clamp it. Sheet metal screws will also work but may eventually come loose.
He also puts shrink tubing over the joint. I used these ideas when I rebuilt
my 40m Yagi.

73 Bill N6CQ/3

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P