[TowerTalk] Hy-Gain rotator pigtails

[Dale Martin]

On Sunday, April 13, 1997 12:10 PM, K7LXC@aol.com wrote:
>TowerTalkians --
>
>discovery!  The WireMan has a pre-made-up (in blister pack, no less)
>8-conductor pigtail set ready to connect to your Ham IV/V or TailTwister.  It
>consists of a male and female set of connectors (that look like the trailer
>type and they're polarized) already attached to about 12 inches of
>8-conductor.  

!  A simple solution to the Hy-Gain quick disconnect problem.  And
>they're only $10.00 per pigtail.  The workmanship is good; they look
>professionally done.  Why didn't someone think of this before?
>
>    
	


Buy two sets (of what ever connectors you prefer).  One for the rotator 
and tower cable.  One for the rotor controller and shack cable.  When 
the rotator is in the shack (and you know at some point in time it will 
be), it's an simple matter to connect it to the controller.  Just make sure 
you have the sexes right.

73,

Dale Martin, KG5U
kg5u@hal-pc.org
http://www.hal-pc.org/~kg5u


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com