[TowerTalk] Rohn AX tower

Stan Griffiths w7ni@teleport.com
Sun, 3 Aug 1997 22:23:15 -0700 (PDT)


>-----BEGIN PGP SIGNED MESSAGE-----
>
>
>What size of hole do you guys recommend for this tower (56 foot
>self-supporter/free-standing).

I tend to recommend what Rohn recommends.  I do not see AX towers in the
current catalog so I expect Rohn does not recommend them at all, at least
for ham use.

I know that won't stop you, so I would recommend what Rohn recommends for a
56 foot BX tower:  a block that is 4 feet on a side and 5' 3" deep, or 4.1
cubic yards.  They also recommend a maximum of 6 square feet of antenna, a
maximum boom length of 10 feet, and maximum winds of 70.7 mph, but that is
for the HEAVIER BX-56 . . .

Personally, I wouldn't use it.

Stan  w7ni@teleport.com


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search