[TowerTalk] 3 High Stack Switching

[george fremin iii]

>What type of switching system are most people using for 3 high stacks of 
>mono-banders?
>
>The only switching system I've seen documented is the N2RM system 
>described by K8CC in the NCJ in 1991.

WX0B makes a switch that works very well.

I have three high stacks where the bottom two antennas are 
fixed to the NE/Europe and are feed in phase all the time.
Then I just do simple U/L/Both switching between the 
stack and the top antenna.

The top antenna rotates.

-- 

George Fremin III
Austin, Texas C.K.U.     "It is hard to be in one place at the same time."
K5TR                             -- Overheard at the TR-Log booth
512/416-7010                          at the Dayton Hamvention
geoiii@bga.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search