[TowerTalk] Re: Pole mounting the Telrex 3 el tribander

[Alan Gray]

IIX Equipment is now selling antenna mounting hardware for telephone poles.

Alan, W3BV 


At 10:44 PM 12/28/1997 -0500, David L. Thompson wrote:
>There was an article in QST in about 1957 about mounting antennas on
>telephone poles.  This material was repeated in ARRL Handbooks and antenna
>for many years (thru the late 70's).
>
>I used this method to mount a Gonset Tri-bander (18' boom)and then two
>quads.  It works and allows for most any rotators.  I started with an old
>CDE TV type and later used the HAM-M.  The top coupling turns to help
>installing the mast and also acts as a sleeve bearing to take some of the
>weight and downward moment off the rotor.  You do need the bottom mounting
>section.
>
>Maybe its time for QST to repeat the article (or someone may have an updated
>version)...get it in print.
>
>The other option is to build a track system up the pole. Then you can raise
>and lower the antenna/rotor.  K5RFJ (now W4XJ) used this type of of system.
>K4EZ also had such a system near Atlanta.
>
>73, Dave K4JRB
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search