Foldover tower raising fixture

[K7LXC@aol.com]

In a message dated 97-01-29 16:07:00 EST, you write:

>I am interested in building/purchasing a raising fixture for my
>crankup/foldover tower. I understand that at least one of these
>is availible commercially. However, from what I understand they
>are quite expensive. If anyone has ever built one of these or knows
>of some possible sources for one I would like to hear from you.

Hi, Paul --

    This project should be undertaken ONLY if you get an engineer involved.
 Is the tower designed to be lowered?  The forces exerted by cranked-over
towers are tremendous.  Either get the factory designed unit or have the
aforementioned engineer design one for you. If there is no factory fixture
available, there is probably a reason why not.   DO NOT attempt to hip-pocket
engineer one.  Please.

73,  Steve   K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & N4VJ / K4AAA