[TowerTalk] 40M interference

[David O Hachadorian]

On Tue, 15 Jul 1997 00:45:52 +0000 "N9YXA-Cedrick Johnson"
<n9yxa@ix6.ix.netcom.com> writes:
>I have a problem. When I use 40M CW/SSB, my Radio shack 12V power 
>supply powering my 2M equipment. When I key down, the voltage surges 
>to around 15 volts, triggering the protection circuit in the 
>radio.... Any suggestions on how to cure this problem?

Never use one of these Radio Shack power supplies for any
piece of valuable equipment. A local ham fried a dual band
HT when the regulator failed. There is no overvoltage
protection in the event of regulator failure.

Dave Hachadorian, K6LL
k6ll@juno.com 

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search