[TowerTalk] Tower identification help

[Greg Becker]

Here we go again... guess I should have paid attention when everyone
else was asking questions...

This galvanized steel triangular tower is in 10 foot long sections. It
is composed of three 1 1/4" diameter legs, 18" on each face, connected
by horizontal braces with no diagonal struts. The braces are in a
"U-channel" configuration, the open end of the "U" facing in. The U is 1
5/8" on the main flat, and 7/8" on each of the "legs". At the lower end
of each leg is an enlarged portion, sized to slip over the leg below it.
Two bolt holes in each end of each leg for thru-and-thru bolting of
sections.

I have access to 9 sections, on the ground, properly stored.
What is it? Ratings? What's it worth?  Help????

Thanks & 73,

-- 
Greg Becker   NA2N   na2n@ifam.com
IFAM - Ideas For American Manufacturers, Inc.
Rondout #343 F&AM  Hendrick Hudson #875 F&AM

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search