[TowerTalk] CATV & Amp Tuneup

[ROBERT SAUVAN]

	I recently ran CATV hardline to my antennas.All worked out very well.I have increased power output barefoot and swr on all antennas and bands on the frequencies I operate most often at 1.2-1 at worst.I figured my settings on my Alpha 89 amp would need to be redone since the change in feedlines.My amp loads very well on all bands and antennas except my tribander.It loads on 15 and 10 meters with full output plus,but 20 meters doesnt want to load well at all.I am lucky to get it to load 1000 watts.This is pushing the limits on the amplifier to get it to this much output.I am wondering why this may be happening and what I might be able to do in order for me to get legal limit out of the amp now on 20 meters.Would retuning my antenna possibly help?Or do I need a jumper to change the feedline length a little,although swr is showing to be about the best it gets. Or???Any help would be appreciated.I know that 500 watts to alot of people is not a big deal,but to me it is,especially in a pileup or contest.The whole idea behind changing feedlines was to increase power output with less loss and improved received signals to boot.

			Anxious to hear ideas,WT9Q-Bob

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search