[TowerTalk] Fwd: grounding bulkhead

UpTheTower@aol.com UpTheTower@aol.com
Wed, 12 Nov 1997 22:25:15 -0500 (EST)


In a message dated 97-11-08 22:26:47 EST, owner-towertalk@contesting.com
writes:

> I am building a new station at a new location, and I would like to have a 
>  neat bulkhead panel for the shack, rf ground, lighting, etc. The house is 
>  stucco, and I would like to know the neatest way for installing a bulkhead

>  panel (like copper) and how to mount it so that it looks professional, 
>  and does the job.  I would like to have about 6-8 coax feed throughs, 
>  with PolyPhaser bulkhead coaxial protectors.  Do I just drill holes for 
>  the PolyPhasers into the copper panel?  How is this panel mounted / 
>  secured in a hole cut into through the stucco and inside wall.  
>  
>  Sorry for such basic questions, but I really want to do this right.
>  
>  So any detailed suggestions onthe best wayto do this would be greatly 
>  appreciated.  
>  
>  Herb
>  
>  herbr@netcom.com
>  


---------------------
Forwarded message:
From:	owner-towertalk@contesting.com
To:	owner-towertalk@contesting.com
Date: 97-11-08 22:26:47 EST