[TowerTalk] TH7 Baluns??

[Rich Hallman N7TR]

   I bought several of the K6NA Aztec RF Baluns for all my beams.  They
have performed great on the TH6's and Monos that I have...These things are
GREAT!!....Now the question.

   I was going to replace the BN-86's on my TH7 stack, and noticed a
problem.  The TH7 has a phasing harness as you know for the 2 driven
elements. The BN86 BOLTS directly to the bottom portion of that harness.
How would I go about installing the K6NA baluns without bolts to the TH7
phasing harness.   I really would rather not cut the wires from the balun
to a length of 1 inch and bolt to the phasing line.  Maybe this is the only
way....Would I need to readjust the driven elements then??   Rather not do
that also.....

   Has this been done by anyone else,  or am I looking into this too
closely???


    Thanks!     Rich  N7TR
  *******************************************************
    Richard Hallman N7TR		N7TR@RNODX.ORG
    11870 Heartpine St		Ex: KI3V, A92FN, HL9RH
    Reno NV 89506			(702) 677-1106
  ********************************************************

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search