[TowerTalk] Coax Beads (split), and EZNEC

[Hsu, Aaron T.]

I'm using T-4 and 4K-LI "Line Isolators" from RadioWorks and they work
real well.  Reduced both RF in my shack as well as TVI.  You might want
to check them out at http://www.radioworks.com.  Full specs are availble
on all their products - Baluns, Line Isolators, antennas, etc.

  - Aaron Hsu, KD6DAE
    athsu@unistudios.com
    dae@pacbell.net

> ----------
> From: 	David Clemons[SMTP:dave@egh.com]
> Sent: 	Monday, October 06, 1997 8:01 AM
> To: 	towertalk@contesting.com
> Subject: 	[TowerTalk] Coax Beads (split), and EZNEC
> 
> Hi,
> 
> 	I need to put beads on my coax to prevent the signal from 
> traveling back down the shield.  I cannot use the type which slide
> over 
> the coax, because the antenna is at the top of the tower.  (I have
> used them
> at the XCVR and experienced a great reduction in TVI, but I also want
> to 
> put them up top where they belong.  Does anyone know where I can get
> the type 
> which will snap around the coax (and what part no.)?
> 
> 	Also, anyone have the address of where I can get EZNEC?
> 
> 73, Dave Clemons K1VUT
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search
> 

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search