[TowerTalk] RE: [Antennas] Mast specs

[James Huang]

	I have a quick question about masts. What type of equipment and parts would you need to mount a Cushcraft Dual-Band HF Vertical approximately 7 feet tall? Thanks.

James Huang
huangp@pacbell.net

-----Original Message-----
From:	Ivo Pezer, 5B4ADA/9A3A [SMTP:9A3A@spidernet.com.cy]
Sent:	Tuesday, October 07, 1997 1:55 PM
To:	Tower Talk; Antennas Reflector
Subject:	[Antennas] Mast specs

The strongest type of mast available in Cyprus is galvanized
stell pipe with following specs:

O.D. 48mm, wall 3.2mm, Class B British standard specs
1387/67 (6m length)
My antennas will be Force 12 duobanders 2-40/4-20 just above
the tower (8.4 sq ft wind load) and 4-15/4-10 (5.74 sq ft
wind load) 8 ft above.

1. need PSI Yield for this type of pipe;

2. bearings are 49mm, so I'll have 0.5mm clearance around
the pipe.
    Are these bearings good for this installation, or
should I wait for  48mm
     bearings (if they can be found).

Ivo Pezer, 5B4ADA/9A3A
<9A3A@spidernet.com.cy>


------
Submissions: antennas@qth.net


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search