[TowerTalk] Guy Anchors

george fremin iii geoiii@bga.com
Tue, 23 Sep 1997 18:08:30 -0500 (CDT)


Franson, Paul D. [NCS] writes:
>I'm putting up a Glen Martin 1850 - 18 inches on a side, 50 feet high.
>It comes with earth screw guy anchors, they recommend 150-175 lbs	
>of tension.
>What's a good alternate if you have a bed of shale where the guys should
>go.
>I could use a tree and the well head pipe, but they are slightly off the
>correct
>alignment. The third guy isn't near anything to attach it to.
>Thanks,  73, W2HCA

As far as screw anchors go you might want to check 
the summary that was written up by N6ZZ a few years ago.
It can be found on the KA9FOX WEB page.

www.QTH.com/ka9fox 

You want to go to the mail summaries page. 

-- 

George Fremin III
Austin, Texas C.K.U.     "It is hard to be in one place at the same time."
K5TR                             -- Overheard at the TR-Log booth
512/416-7010                          at the Dayton Hamvention
geoiii@bga.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search