[TowerTalk] Garage Door RFI - Solution needed

[Les - KL7J]

Ah...your right Charles.  Obviously I'm beyond any spelling checker help ;')

-----Original Message-----
From: Charles H. Harpole <harpole@pegasus.cc.ucf.edu>
To: Les <buchholz@Alaska.NET>
Cc: TOWERTALK@contesting.com <TOWERTALK@contesting.com>; T A RUSSELL
<n4kg@juno.com>
Date: Thursday, April 23, 1998 3:43 PM
Subject: Re: [TowerTalk] Garage Door RFI - Solution needed


>When I turn my opener off, my KW does not faze it, but there is some
>tendency to phase it if the lines are in phase.  K4VUD
>> >
>>
>> Yep.
>>
>> Cured mine with a 10 Mh rf choke (J.W. Miller part #6306  About $3) on
each
>> line of the doorbell button wire right where the line attaches to the
door
>> opener.
>>
>> You may want to remove the doorbell wire (used to open without the
remote)
>> from the unit and see if your problem is RF on the wire.
>>
>> 1500 watts out does not phase it now.
>>
>> Good Luck.
>>
>>
>>
>> --
>> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>> Submissions:              towertalk@contesting.com
>> Administrative requests:  towertalk-REQUEST@contesting.com
>> Problems:                 owner-towertalk@contesting.com
>> Search:                   http://www.contesting.com/km9p/search
>>
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search