[TowerTalk] 25G Rotator Plate.

[K7LXC@aol.com]

In a message dated 98-08-10 07:40:22 EDT, w7ni@teleport.com writes:

>  You can also install them at the
>  junction of the top section and the section below it if you cut out one
>  horizontal brace at the bottom of the top section so you can get the
rotator
>  inside the tower.

      A Ham IV can be pushed (grunted?) through the diagonals without cutting
them. 

Cheers,  Steve  K7LXC

Champion Radio Products
http://www.championradio.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm