[TowerTalk] Parts for AEA Isoloop

Eric Gustafson n7cl@mmsi.com
Mon, 10 Aug 1998 17:05:07 -0700



>From: Michael Lamb <n7ml@imt.net>
>Date: Mon, 10 Aug 1998 21:16:54 -0600
>----------
>From: 	Eric Gustafson[SMTP:n7cl@sparx.mmsi.com]
>Sent: 	Monday, August 10, 1998 11:41 AM
>To: 	AF7Y@msn.com; towertalk@contesting.com
>Subject: 	Re: [TowerTalk] Parts for AEA Isoloop
>
>Hello Eric:
>
>I think that what you have noted is accurate in the statement of
>the symptom, but not necessarily the cause.  It turns out that
>there was a production flaw in the early IsoLoop antennas that
>caused the parts to stress and break out.  It was caused by
>driving some shear pins through the gear into the fork assembly.
>With time, the fork assembly simply cracked and would no longer
>support the gear.  AEA simply started drilling the holes that the
>shear pins went into and apparently fixed the problem altogether.
>
>Tempo Research, the new parent company, is offering a repair kit
>composed of a new gear, the fork and pins for $20.00 which I
>believe includes shipping and handling.  You can order one by
>calling 1-800-258-7805 and asking for Annette.


Hi Mike,

Thanks for the information.  I had just been on the new web page
for AEA/Tempo.  I didn't find any reference to the Isoloop.  So I
was afraid that they weren't going to be continuing or supporting
this product.  Its good to know that they can supply the part.

You are correct about the shear pin at least for the earlier
ones.  Of the units that I actually disassembled and looked over
carefully (as opposed to units where I had the owner do this),
one was definitely a failure related to the pin.  It looked to me
as though the pin had been driven into place but I didn't think
much of this at the time.  I thought it might have just been an
artifact of the molding process.

At least one of the other loops was definitely bumped.  It worked
prior to the bump and didn't work after the bump.  So we ascribed
the failure to the bump.  The failure of this part did not seem
to be related to the pin hole.

73, Eric  N7CL

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm