[TowerTalk] Soldering Iron Problem's

James P. Cassidy 107770.3462@compuserve.com
Tue, 25 Aug 1998 23:42:52 -0400


Tom, I had a problem like that with a Wen gun, the tipe had cracked in 2 at
the end and was an open circuit some of the time.  never had that problem
with  a weller that has a heavier section at the tip.
More likely the problem could be some corrosion or chemical at the lugs
that isn't passing the current.

Just saw the reply from K3MM, I would recommend that as a replacement as
well, the large butane irons will really out out the heat.  Some can also
be used a small torch as well.
73 Jim

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm