[TowerTalk] Back on the KT34XA re-cap/problems

[thompson@mindspring.com]

Well after several set backs and some eye problems I finally got back on the
KT34XA.  Gary K9AY kindly gave me a piece of 3/8" stock and I got one from
another non-ham friend.  Here is the rub....

The 3/8" stock are both 0.376 in diameter.  The so-called 3/8" from KLM is
only 0.344" in diameter.  This is a difference of 0.032".   So the first
thing I found was the "real" 3/8" was too big for the new blue caps.  So I
pulled out my trusty reamer set and made the blue caps match 0.376".
I used K1KY's suggestion and dipped the 4 caps in hot water and they went on
smoothly.  Then I found problem number 2.  The straps were to small!   So I
merely opened them up put the 3/8" tube inside and put the hardware back in.
Except for dropping the nut once this worked nicely.

This finishes up the 1st director. I missed all the contests and Pratas
(again) but with luck will get everything ready to go up by early January.

Dave K4JRB



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm