[TowerTalk] [Fwd: Returned mail: header syntax error, line " boundary="----=_NextPart_000_0052_01BE2353.66DBEF60"": No such file or directory]
michael d. ihry
mihry@argontech.net
Wed, 09 Dec 1998 16:31:54 -0600
This is a multi-part message in MIME format.
--------------F035DE0D7DE302AF7D08A71F
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
--------------F035DE0D7DE302AF7D08A71F
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Return-Path: <>
Received: from contesting.com (dayton.akorn.net [205.217.100.11])
by ns1.argontech.net (8.8.7/8.8.8) with ESMTP id JAA02745
for <mihry@argontech.net>; Wed, 9 Dec 1998 09:18:02 -0600
Received: from alphatje.NL.net (alphatje.NL.net [193.78.240.11])
by contesting.com (8.9.1a/8.9.1) with ESMTP id KAA21266
for <owner-towertalk@contesting.com>; Wed, 9 Dec 1998 10:12:12 -0500 (EST)
Received: from hqfw01.libertel.nl ([194.229.118.10]:5892 "EHLO hqom01.libertel" ident: "TIMEDOUT") by alphatje.NL.net with ESMTP id <244580-8331>; Wed, 9 Dec 1998 16:11:07 +0100
Received: from alphatje.NL.net (hqfw02.libertel) by hqom01.libertel with ESMTP
(1.40.112.4/16.2) id AA133806305; Wed, 9 Dec 1998 16:11:27 +0100
Date: Wed, 9 Dec 1998 09:07:52 -0600
From: Mail Delivery Subsystem <MAILER-DAEMON@libertel.nl>
Subject: Returned mail: header syntax error, line " boundary="----=_NextPart_000_0052_01BE2353.66DBEF60"": No such file or directory
To: <owner-towertalk@contesting.com>
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa"
Message-Id: <19981209151113Z244580-8331+622@alphatje.NL.net>
------- =_aaaaaaaaaa
Content-Type: text/plain; charset="us-ascii"
Content-Description: Session Transcript
553 header syntax error, line " boundary="----=_NextPart_000_0052_01BE2353.66DBEF60"": No such file or directory
------- =_aaaaaaaaaa
Content-Type: message/rfc822
Content-Description: Returned Content
Received: from alphatje.NL.net (hqfw02.libertel) by hqom01.libertel with ESMTP
(1.40.112.4/16.2) id AA133796287; Wed, 9 Dec 1998 16:11:27 +0100
Return-Path: <owner-towertalk@contesting.com>
Received: from [205.217.100.11] ([205.217.100.11]:51719 "EHLO contesting.com" ident: "NO-IDENT-SERVICE[2]") by alphatje.NL.net with ESMTP id <244480-18252>; Wed, 9 Dec 1998 16:09:08 +0100
Received: from dayton.akorn.net (dayton.akorn.net [205.217.100.11])
by contesting.com (8.9.1a/8.9.1) with SMTP id KAA21237;
Wed, 9 Dec 1998 10:08:40 -0500 (EST)
Received: by dayton.akorn.net (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32)); Wed, 09 Dec 1998 10:07:46 -0500 (EST)
Message-Id: <005501be2385$b5857f00$0a0101bf@scsueepe>
From: "Mike A. King" <scsueepe@mtcnet.net>
To: Towertalk@contesting.com
Mmdf-Warning: Parse error in original version of preceding line at mtcnet.net
Subject: [TowerTalk] Need Comments on F12- 6M, 10M and 40M ants & a Boomer
Date: Wed, 9 Dec 1998 09:07:52 -0600
Mime-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_NextPart_000_0052_01BE2353.66DBEF60"
X-Priority: 3
X-Msmail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3110.1
X-Mimeole: Produced By Microsoft MimeOLE V4.72.3110.3
Sender: owner-towertalk@contesting.com
Precedence: bulk
X-List-Info: http://www.contesting.com/towertalkfaq.html
X-Sponsor: W4AN, KM3T, N5KO & AD1C
Content-Transfer-Encoding: 7bit
This is a multi-part message in MIME format.
------=_NextPart_000_0052_01BE2353.66DBEF60
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello fellow hams,
I am considering the following Force 12 yagis and a boomer. Would like =
your
comments on them one way or another. If you can comment on one, or all, =
any
are appreciated. Comments on the tower are appreciated as well.
MAG340 at 56'
(30' boom 3 ele 40M beam - 6 Sqr Ft)
MAG810 at 62'
(30' boom 8 ele 10M beam - 4.2 Sqr Ft)
EF906 at 67'
(30' boom 9 ele 6M beam - 3.4 Sqr Ft)
and a 17B2 Cushcraft Boomer at 72'
(31' boom - 17 ele 2M beam - 3.9 Sqr Ft)
Total Sqr Ft =3D 17.5 + 1 for the mast =3D 18.5 Sqr Ft Total
I was going to put them on my soon to be installed HDX-555 with 20' =
Cromaly
mast. This tower is rated for 30 Sqr Ft at 50MPH and 1' above the =
tower. I
belive it is rated for 23 Sqr ft at 70MPH
Planning on a a yasue G1000SDX rotor, 23 Sqr Ft. Assuming 3' of the =
CM-20
mast within the tower.
Or could I practically put the 10M beam at the top? What about the =
MAG340?
What do you experienced tower and yagi folks out there have to say? =
This is
my first tower and I could use a little insight. The base is poured and
ready for the tower to be delivered on Jan 1, so I need to get going on =
these
antennas.
Thanks to all of you in advance!
Mike - KM0T scsueepe@mtcnet.net
------=_NextPart_000_0052_01BE2353.66DBEF60
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>Hello fellow hams,<BR><BR>I am considering the following Force 12 =
yagis and=20
a boomer. Would like your<BR>comments on them one way or =
another. If=20
you can comment on one, or all, any<BR>are appreciated. Comments =
on the=20
tower are appreciated as well.<BR><BR>MAG340 at 56'<BR>(30' boom 3 ele =
40M beam=20
- 6 Sqr Ft)<BR><BR>MAG810 at 62'<BR>(30' boom 8 ele 10M beam - 4.2 Sqr=20
Ft)<BR><BR>EF906 at 67'<BR>(30' boom 9 ele 6M beam - 3.4 Sqr =
Ft)<BR><BR>and a=20
17B2 Cushcraft Boomer at 72'<BR>(31' boom - 17 ele 2M beam - 3.9 Sqr=20
Ft)<BR><BR>Total Sqr Ft =3D 17.5 + 1 for the mast =3D 18.5 Sqr Ft =
Total<BR><BR>I was=20
going to put them on my soon to be installed HDX-555 with 20'=20
Cromaly<BR>mast. This tower is rated for 30 Sqr Ft at 50MPH and 1' =
above=20
the tower. I<BR>belive it is rated for 23 Sqr ft at =
70MPH<BR><BR>Planning=20
on a a yasue G1000SDX rotor, 23 Sqr Ft. Assuming 3' of the CM-20<BR>mast =
within=20
the tower.<BR><BR>Or could I practically put the 10M beam at the =
top? What=20
about the MAG340?<BR><BR>What do you experienced tower and yagi folks =
out there=20
have to say? This is<BR>my first tower and I could use a little=20
insight. The base is poured and<BR>ready for the tower to be =
delivered on=20
Jan 1, so I need to get going on these<BR>antennas.<BR><BR>Thanks to all =
of you=20
in advance!<BR><BR>Mike - KM0T <A=20
href=3D"mailto:scsueepe@mtcnet.net">scsueepe@mtcnet.net</A><BR></DIV></BO=
DY></HTML>
------=_NextPart_000_0052_01BE2353.66DBEF60--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
------- =_aaaaaaaaaa--
--------------F035DE0D7DE302AF7D08A71F--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm