[TowerTalk] mounting barrel connectors on lightning bulkhead

[James D. Bruce]

Pete, yes they are still made. Electrical supply houses have them. 3/4" hole
saws work great also.
Jim/NV3V
-----Original Message-----
From: Pete Smith <n4zr@contesting.com>
To: towertalk@contesting.com <towertalk@contesting.com>
Date: Thursday, July 23, 1998 10:11
Subject: [TowerTalk] mounting barrel connectors on lightning bulkhead


>
>I am  adding a ground-level grounding panel for better lightning protection
>for my TOWER and ANTENNAS, and am not looking forward to drilling many
>holes for coax connectors, then reaming to size (I lack a large-enough
>drill).  What other options are out there?  Do they still make chassis
>punches to do this job?
>
>
>
>73,  Pete Smith N4ZR
>In wild, wonderful, fairly rare WEST Virginia
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm