[TowerTalk] Lining up Antenna Elements

[T A RUSSELL]

I have a 2 inch mast stuck in the ground which I use for antenna
assembly.
(A piece of old TV mast tubing 2" in diameter is used as the "drill" to
pull
out the dirt, several inches at a time, then insert a heavier 2 inch
mast).
Check alignment with a level.

After attaching the boom, the elements are leveled using a level sitting
on a piece of angle aluminum which has two pieces of 1 X  4  nailed 
at each end to hold the level above mounting and/or matching hardware.

de  Tom  N4KG
.............................

On Mon, 08 Jun 1998 21:28:11 -0500 Larry Burke <lburke@wt.net> writes:
>
>
>I've assembled a lot of yagis, but always seem to run into the problem 
>of
>getting the elements to line up with each other in a horizontal plane
>parallel with the ground. I'm about to assemble several more. Any 
>tricks of
>the trade out there for getting this right the first time?
>
>
>Larry WI5A
>Friendswood, TX
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm