Re[2]: [TowerTalk] protecting rotor terminal strips
T A RUSSELL
n4kg@juno.com
Mon, 29 Jun 1998 19:54:12 -0600
I replace the standard rotor terminal screws with stainless steel screws.
de Tom N4KG
............................
On Wed, 8 Apr 1998 10:46:23 -0400 GORDENH1@westat.com (GORDENH1) writes:
>--IMA.Boundary.7396402980
>Content-Type: text/plain; charset=US-ASCII
>Content-Transfer-Encoding: 7bit
>Content-Description: cc:Mail note part
>
> You might want to consider using "GE RTV-618", similar to
>windshield
> sealer. It sets up in about 24hr, using the moisture in the air,
>but
> it never hardens. I have used it on many out/indoor projects,
>and it
> peels off rather easy. May have to use X-acto blade in some very
>
> small areas or spots to remove. Also good for sealing coax
>connectors
> if you don't have access to the product called coax-seal. Lasts
>many
> years if you don't disturb it.
>
> 73, de Howard W3CQH
>
>
>
>
>______________________________ Reply Separator
>_________________________________
>Subject: Re: [TowerTalk] protecting rotor terminal strips
>Author: "Charles H. Harpole" <harpole@pegasus.cc.ucf.edu> at
>Internet-E-Mail
>Date: 4/8/98 8:07 AM
>
>
>I have used Scotch electric sealer (comes in liquid brush on form).
>Works
>ok; very hard to get off later.
>used nothing, screws rusted within one year.
>used silicone windshield sealer; preserves gud, very very hard to get
>
>off later.
>used Krylon clear spray; a little rust after three years, hard to
>tell
>where it is for later scraping and reconnecting of wires.
>
>U gotta use sompthin, cause rust is your alternative.
>de K4VUD
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search
>--IMA.Boundary.7396402980
>Content-Type: text/plain; charset=US-ASCII; name="RFC822 message
>headers"
>Content-Transfer-Encoding: 7bit
>Content-Description: cc:Mail note part
>Content-Disposition: inline; filename="RFC822 message headers"
>
>Received: from dayton.akorn.net ([205.217.100.11]) by
>westatpo.westat.com with
>SMTP
> (IMA Internet Exchange 3.0 Enterprise) id 000204DF; Wed, 8 Apr 98
>08:13:18
>-0400
>Received: from dayton.akorn.net (dayton.akorn.net [205.217.100.11])
> by dayton.akorn.net (8.8.5/8.8.5) with SMTP id IAA14516;
> Wed, 8 Apr 1998 08:11:57 -0400 (EDT)
>Received: by dayton.akorn.net (TLB v0.10a (1.23 tibbs 1997/01/09
>00:29:32));
>Wed, 08 Apr 1998 08:11:42 -0400 (EDT)
>Date: Wed, 8 Apr 1998 08:07:56 -0400 (EDT)
>From: "Charles H. Harpole" <harpole@pegasus.cc.ucf.edu>
>X-Sender: harpole@pegasus
>To: Ted Leaf <tleaf@hotmail.com>
>cc: towertalk@contesting.com
>Subject: Re: [TowerTalk] protecting rotor terminal strips
>In-Reply-To: <19980408101056.17704.qmail@hotmail.com>
>Message-ID: <Pine.SOL.3.96.980408080354.18566B-100000@pegasus>
>MIME-Version: 1.0
>Content-Type: TEXT/PLAIN; charset=US-ASCII
>Sender: owner-towertalk@contesting.com
>Precedence: bulk
>X-List-Info: http://www.contesting.com/towertalkfaq.html
>X-Sponsor: W4AN, KM3T, N5KO & AD1C
>--IMA.Boundary.7396402980--
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search
>
_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm