[TowerTalk] Identify big aluminum tower ?
Mon, 16 Nov 1998 13:08:18 -0600
>From your description so far, it seems very likely that it is one of our
Heights aluminum crank-up towers.
I would like to know a couple sample leg tube diameters on the sections to
From: warren munro <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Cc: email@example.com <firstname.lastname@example.org>
Date: Monday, November 16, 1998 12:13 PM
Subject: [TowerTalk] Identify big aluminum tower ?
>Can anyone help identify a big aluminum triangular tower I have come across
>It is BIG, evidently a 3 section crankup, though the raising hardware is
>missing. The face width of the base section is 24 inches and each of the
>three sections is 24 feet long (being built up of 8 feet sections). There
>is sturdy Z-bracing welded to the side rails. All sections join with swage
>The truly unique part is that on the two lower sections there are sets of
>rubber rollers to cushion the up-and-down motion. The base section has 2
>sets of 3 rollers and the next section has 2 sets of rubber rollers. The
>third (top ?) section has no rollers.
>Anyone familiar with this type of tower - do you have any idea on a source
>of the rollers, as those on tower are completely shot.
>I remember an AlPar or AllPar tower being advertised in QST. Do this ring
>a bell with anyone ?
>Any info would be greatly appreciated.
>73, Warren KH6WM
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com