[TowerTalk] heliax
Eric Gustafson
n7cl@mmsi.com
Mon, 21 Sep 1998 08:54:33 -0700
Phil,
Yes. There are two different styles.
No. The connectors are not interchangeable. The connector to
cable interface for the spiral type cable is much more difficult
to seal. It requires a large adhesive lined heatshrink boot (our
installers refer to this stuff as snotshrink) for sealing.
The connector for the straight corrugated cable is inherently
sealed (with o-rings) if applied correctly. No heatshrink
needed.
I wouldn't use the spiral corrugated cable unless I was forced
to.
73, Eric N7CL
>From: "Phil Duff" <na4m@texas.net>
>Date: Mon, 21 Sep 1998 05:18:41 -0000
>
>I've been told that there are two styles of Andrews heliax
>shield designs. One has a spiral corrugated copper jacket
>(older style?) and the other (newer?) style jacket is
>corrugated copper but without being spiral. Is this correct?
>If so, are connectors interchangeable between the two jacket
>styles?
>
>73 de Phil NA4M
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Phil Duff NA4M "...life gets mighty precious when
>na4m@texas.net there's less of it to waste..."
>Georgetown, Texas Bonnie Raitt - "Nick of Time"
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm