[TowerTalk] 4 point guying...how?

[SavageBR@aol.com]

Rohn makes a set of guy arms for 4 point guying. One is a Y shaped arm that
bolts to the standard guy bracket and give you two guy arms at 90 degrees. The
other two guy arms are like a torque arm with a formed angle. They each bolt
to the std guy bracket and due to the angle, provide a 90 degree guy angle. 

This hardware is normally used on their  FK25G tiltover towers for 90 deg
guys.
Sorry I don't have the part numbers.
Bruce AA4Z 

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm