[TowerTalk] Pinouts for tailtwister connectors

[K7LXC@aol.com]

In a message dated 99-08-13 09:23:18 EDT, rhealy@adaptivebroadband.com writes:

> I have a Tailtwister with the 8-pin Amp (round, twist-lock) connector. The
>  control box has a Cinch-Jones connector. The manual I got with the rotator
>  doesn't show these connector pinouts, so I'd appreciate hearing from anyone
>  who has the pinout information (or a link to it) so I can wire the
>  connectors and get the upper antennas spinning on the back tower! Thanks in
>  advance.

Hi, Rus --

       It's just 1 to 1, 2 to 2, 3 to 3, etc. 

       The wires for the Amp connector need to be the same length with the 
pins on them. Push them in (when you're done soldering) until they 'click'. 
Unless you have a pin extractor, this is a one-time, non-reversible operation 
so be sure you're ready to go. Or wait until you've got an extractor. 

Cheers,   Steve   K7LXC

Cheers,   Steve   K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm