[TowerTalk] Pse help Glen Martin grounding

WA9ALS - John jfleming@shelbynet.net
Wed, 25 Aug 1999 15:00:41 -0500


I'm having a lot of trouble grounding my Glen Martin aluminum tower!  They 
supply one short wire and a ground rod - HI.  I have copper strap I plan to 
use more in line with Polyphaser recs.  However, I'm having trouble 
figuring out how to best attach copper strap to this tower.

The aluminum tower legs are bolted into a steel "boot" at the base/bottom 
of the tower.  Choices for attaching the copper strap seem to be either the 
tower legs or the boot.  I ordered some angle adapters, but these will not 
fit my tower, and the ones I got don't look suited for copper strap.

1.  Any good ideas about how to fasten strap to the boot or tower legs?  I 
could bolt it to the boot if you think the contact area/proximity  would be 
sufficient.  I figure drilling in the legs would be a bad idea, and the 
carriage bolts that attach the sections won't accomdate the strap well 
either.

2.  Any ideas about a good clamping scheme to attach to the legs or boot?

3.  Other ideas?

(If you have the time, the tower is pictured at the web site below.)
MANY THANKS!
------------------------------------------------------------------------  
-----------------------------------------------
WA9ALS - John  mailto:jfleming@shelbynet.net
Tower Project http://www.shelbynet.net/~jfleming/towerprogress.htm
Amateur Homepage http://www.shelbynet.net/~jfleming/amstart.htm
------------------------------------------------------------------------  
-----------------------------------------------


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm