[TowerTalk] Back On Topic -- Are These Parts OK for a Rohn 45 Tower?

[Gerald Smith]

David,

Be sure and look at the tower sections you receive, Rohn is having
quality control problems. Of 26 sections I received, many were faulty.
The dealer, in turn, found that over 50% of his inventory was defective.
Rohn DOES stand up to the problem and provide remedy.

Gerry, W6TER

DavidC wrote:
> 
> I am taking inventory of my Rohn 45 parts before I start digging holes.
> 
> I have several turnbuckles that are labeled "6" at one end and "1/2"
> at the other.
> 
> The tower will have one section partially sunk in the base, five full
> sections above that and then the top section for about 65 feet in height.
> The guys are Phillystran with metal guy cable patched in at the ends.
> 
> Are these turnbuckles acceptable?
> 
> - Thanks! & 73, DavidC  K1YP
> ************************************************************************
> 
> __________________________________________
> NetZero - Defenders of the Free World
> Get your FREE Internet Access and Email at
> http://www.netzero.net/download/index.html
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm