[TowerTalk] Rotating tower

[Ray LaRue]

Tom,
I had my guy rings made at a local machine shop.  They took flat stock
and formed an inner angle ring and then an outer angle ring.  The ends
were welded together to close the rings.  I mounted wp bearings inside
them.  I then welded guy loops to the outer ring and leg brackets to the
inner.  I installed the assembly on my 72'x18" Heights, aluminum tower.
The tower swings a Mosely S402 at the top and a CL36, 24' below.  The
top guy ring is just below the CL36.  It's been working perfectly for
years.  Will be glad to share any further info if you need.
73,
Ray, W4BYG


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm