[TowerTalk] greased bolts?

[Arthur Moe]

No, But I would go for some water proof stuff.  I like wheel bearing
grease that is made for boat trailers axle bearings.

Which method got them out.

Art
KB7WW


gbay wrote:
> 
> Thanks for all the input concerning the sheared off bolts in my Ham-IV
> rotator.  The unit is off the tower and I've got the bolts out.  Now to
> reassemble everything.  I've followed the thread about using lock-tite.
> However, the manual says to use grease and so does the local machine shop.
> Anything wrong with using plain old grease on the threads?
> 
> Thanks for the help.
> 
> Gerry, W1XY
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm