[TowerTalk] mouting/weather proofing T2X capacitor at tower

[Phil Duff]

I used a short piece of PVC pipe and couple of matching PVC
end caps.  Solder wire pigtails onto cap long enough to
reach bottom of T2X, drill hole in one of the PVC caps
to feed the pigtail thru then put the motor cap inside
the PVC pipe and put on the caps and tape or hose clamp
to convenient tower leg or whatever.

73 de Phil NA4M
-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Phil Duff NA4M     na4m@texas.net   Georgetown, Texas

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm