[TowerTalk] Rohn 20

[Robert Sauvan]

	At present I am in the process of stacking 2 KT34XA's on an 80 ft Rohn 25
tower.
	One of the beams is fixed at 50' bolted to the side of the tower,and the
other is at
	82' rotateable. There is alot of Rohn 20 tower available in this area on
the used
	market and I was just curious as to whether or not a Rohn 20 would be able to
	support this same configuration.My present setup is guyed in 3 places,as
would
	a Rohn 20 tower if it were a feasible.

						Thanks, just curious
						Bob-WT9Q


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm