[TowerTalk] A Different Take On Guy Wires?

[K7LXC@aol.com]

In a message dated 99-05-02 13:48:11 EDT, K7LXC@aol.com writes:

> > On a related thread would not just one set of 1/4" EHS guys at the 40'
>  >  level be sufficient for a modest tribander type of installation?
>  
>       For 45G? According to the Rohn catalog, that's the recommended 
>  configuration. One set up to 50 feet at 110 MPH. You do have a Rohn 
catalog, 
>  don't you?

       I made an error in this post. A 40' and 50' tower should have one set 
of guys at the top. If the person was referring to a higher tower (i.e. 60'), 
of course this would be a mistake. This was pointed out by W8KI. My apologies.

Cheers,  Steve   K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm