[TowerTalk] Stainless Bolts and Nuts on Tower

[Tom H]

........<snip>
> Good grief, no need to ever tighten the hardware so much that the tubes
> are deformed. If you do, you have probably exceeded the allowable
> percentage of yield values on the bolts.
.......<snip>
> N5RP
>
>
Actually, Rohn specifically states to tighten the bolts until the tubes
deform.




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm