[TowerTalk] Cleaning a TH7DX trap

[n4kg@juno.com]

If the antenna is on the ground, it would be a good idea to
check ALL the traps.  The END  COVERS tend to crack
and should either be replaced or taped to prevent further
deterioration.

I have found loose screws inside the cover (the ones that
anchor each end of the coil wire) so it is a good idea to
disassemble the trap and inspect inside.  This is easily
done by sliding the end covers off and removing the 1/4
inch hex screw from the trap end.  The cover can slide off
fairly easily, exposing the coil inside.  Be careful not to
strip the threads by overtightening !

There should be continuity across EVERY trap.

de  Tom  N4KG


___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm