[TowerTalk] Yaesu G-1000 Control Wiring Solved

[Bobby Webb]

Although the G-1000 manual says "Pin 6 (center
pin) is
not used", the wiring is straight through 1-5 on
the round
rotor connector, disregarding that Pin 4 is the
center pin !
Thanks to N3SL


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm